dual:/home/domus# xm dmesg
ERROR: cannot use unconfigured serial port COM1
 __  __            ____    ___   __   
 \ \/ /___ _ __   |___ \  / _ \ / /_  
  \  // _ \ '_ \    __) || | | | '_ \ 
  /  \  __/ | | |  / __/ | |_| | (_) |
 /_/\_\___|_| |_| |_____(_)___(_)___/ 
                                      
 http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory

 Xen version 2.0.6 (root@[unknown]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) Mon Jun 13 23:39:47 UTC 2005
 Latest ChangeSet: information unavailable

(XEN) Physical RAM map:
(XEN)  0000000000000000 - 000000000009fc00 (usable)
(XEN)  000000000009fc00 - 00000000000a0000 (reserved)
(XEN)  00000000000f0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 000000000fff0000 (usable)
(XEN)  000000000fff0000 - 000000000fff3000 (ACPI NVS)
(XEN)  000000000fff3000 - 0000000010000000 (ACPI data)
(XEN)  00000000fec00000 - 0000000100000000 (reserved)
(XEN) System RAM: 255MB (261692kB)
(XEN) Xen heap: 10MB (10788kB)
(XEN) CPU0: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0387fbff 00000000 00000000 00000000
(XEN) found SMP MP-table at 000f5b20
(XEN) ACPI: RSDP (v000 VIA694                                    ) @ 0x000f7370
(XEN) ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
(XEN) ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
(XEN) ACPI: MADT (v001 VIA694          0x00000000  0x00000000) @ 0x0fff5900
(XEN) ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 Pentium(tm) Pro APIC version 17
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 Pentium(tm) Pro APIC version 17
(XEN) Using ACPI for processor (LAPIC) configuration information
(XEN) Intel MultiProcessor Specification v1.4
(XEN)     Virtual Wire compatibility mode.
(XEN) OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
(XEN) I/O APIC #2 Version 17 at 0xFEC00000.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Processors: 2
(XEN) Using scheduler: Borrowed Virtual Time (bvt)
(XEN) Initializing CPU#0
(XEN) Detected 1002.297 MHz processor.
(XEN) CPU0: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0387fbff 00000000 00000000 00000000
(XEN) CPU0 booted
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) masked ExtINT on CPU#1
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) CPU1: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0387fbff 00000000 00000000 00000000
(XEN) CPU1 has booted.
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) Setting 2 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 2 ... ok.
(XEN) init IO_APIC IRQs
(XEN) ..TIMER: vector=0x41 pin1=2 pin2=0
(XEN) Using local APIC timer interrupts.
(XEN) Calibrating APIC timer for CPU0...
(XEN) ..... CPU speed is 1002.2478 MHz.
(XEN) ..... Bus speed is 133.6329 MHz.
(XEN) ..... bus_scale = 0x000088D7
(XEN) checking TSC synchronization across CPUs: passed.
(XEN) Time init:
(XEN) .... System Time: 62060611ns
(XEN) .... cpu_freq:    00000000:3BBDDA04
(XEN) .... scale:       00000001:FED38161
(XEN) .... Wall Clock:  1127649332s 200000us
(XEN) PCI: PCI BIOS revision 2.10 entry at 0xfb2c0, last bus=1
(XEN) PCI: Using configuration type 1
(XEN) PCI: Probing PCI hardware
(XEN) PCI: Probing PCI hardware (bus 00)
(XEN) PCI: Using IRQ router VIA [1106/0686] at 00:07.0
(XEN) PCI->APIC IRQ transform: (B0,I7,P3) -> 5
(XEN) PCI->APIC IRQ transform: (B0,I7,P3) -> 5
(XEN) PCI->APIC IRQ transform: (B0,I12,P0) -> 11
(XEN) PCI->APIC IRQ transform: (B0,I15,P0) -> 10
(XEN) PCI->APIC IRQ transform: (B0,I18,P0) -> 10
(XEN) PCI: Enabling Via external APIC routing
(XEN) mtrr: v2.0 (20020519)
(XEN) mtrr: your CPUs had inconsistent variable MTRR settings
(XEN) mtrr: probably your BIOS does not setup all CPUs.
(XEN) mtrr: corrected configuration.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=2.0,VIRT_BASE=0xC0000000,LOADER=generic,PT_MODE_WRITABLE'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Kernel image:  00c00000->00ffc808
(XEN)  Initrd image:  00000000->00000000
(XEN)  Dom0 alloc.:   01000000->09000000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: c0100000->c0532044
(XEN)  Init. ramdisk: c0533000->c0533000
(XEN)  Phys-Mach map: c0533000->c0553000
(XEN)  Page tables:   c0553000->c0556000
(XEN)  Start info:    c0556000->c0557000
(XEN)  Boot stack:    c0557000->c0558000
(XEN)  TOTAL:         c0000000->c0800000
(XEN)  ENTRY ADDRESS: c0100000
(XEN) Scrubbing DOM0 RAM: ..done.
(XEN) Scrubbing Free RAM: ...done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen).

dual:/home/domus#